Harman Kardon SIG2.1 Owners Manual - Page 6

Front Panel Controls Signature 2.1 Front and Rear Panels On/Off 1 23 1 Power Switch: Press this switch to turn the 2.1 on for manual operation, or to place it in the Standby mode for automatic/remote turn-on when the 2.1 is connected to a device with a compatible trigger circuit. 2 Power On Indicator: When the word SIGNATURE is illuminated in blue, the 2.1 is in a normal operating condition. 3 LED Indicator: The color of this indicator varies with the status of the 2.1. It is red when the unit is off and in manual operation, amber in the standby mode, and flashing green during warm-up. If the indicator flashes and alternates between red and amber, the 2.1 is in the protect mode, indicating a problem in the unit or connections to the speakers. Rear Panel Connections 1 CHANNEL ONE (FRONT RIGHT) SPEAKER IN 2 CHANNEL TWO (SURROUND RIGHT) SPEAKER IN 4 Ω MIN. 4 Ω MIN. 3 CHANNEL THREE (FRONT CENTER) SPEAKER IN 4 Ω MIN. 4 CHANNEL FOUR (SURROUND LEFT) SPEAKER IN 4 Ω MIN. CHANNEL FIVE (FRONT LEFT) 5 SPEAKER IN POWER AMP 4 Ω MIN. AC INPUT TRIGGER IN AC 12OV/60Hz 950W ¡ ™ £ ¢ ¡ Speaker Outputs: Connections from these terminals should be made to the appropriate speakers in your system. ™ Audio Inputs: Connect the outputs of the Signature 2.0, or other surround processor, preamplifier or decoder to these jacks. £ AC Power Cord: Connect this plug to a wallmounted AC outlet. Due to the current draw of the Signature 2.1, it is NOT recommended that the accessory outlets on the back of the audio/video components be used to power this product. ¢ Power Amp Trigger In: Connect this jack to the matching trigger output on a Signature 2.0 or other compatible device to have the 2.1 automatically turn on when the device is activated. See page 5 for additional details. 4