Harman Kardon STEREO RECITAL TA224 Owners Manual - Page 9
Blend, Control, Power, On/Off, Switch, Tuning, Controls
View all Harman Kardon STEREO RECITAL TA224 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
In order to take maximum advantage of the benefits of AFC, it is suggested that fine tuning be done with the Tuner Selector Switch in the FM position. When the switch is then turned to the FM-AFC position the AFC will improve this careful tuning by a factor of 10 to 1. This procedure is especially recommended when a weak station is being tuned on a channel adjacent to a stronger one. This will prevent the AFC froth reaching for the more powerful signal and skipping over the weaker one. If the weaker station is tuned in without the AFC, when the AFC is applied it will lock it in permanently. Blend Control: This control is used to introduce a controlled amount of crosstalk between the two channels to fill in the hole in the middle found in certain stereo program material. Rotate the BLEND knob clockwise to engage the control. When set to the extreme clockwise position the result will be monophonic. (A + B) Power On/Off Switch: The ON/OFF switch is located in the TREBLE control knob furthest from the panel. To turn the set on, rotate the TREBLE control knob in a clockwise position. AM and FM Tuning Controls: These controls are located on the front panel and are used to tune for AM or FM stations. For simulcast AM-FM stereo reception, it is necessary to tune the AM and FM sections separately. AM GANG "T HEAVY LINE DENOTES AM STRING FINE LINE DENOTES FM STRING AM a FM TUNING CAPACITORS CLOSED AM -FM STRINGING DIAGRAM AM TUNING SHAFT FM TUNING SHAFT FM GANG O