Harman Kardon T300X Owners Manual - Page 2

TECHNICAL SPECIFICATIONS FM Circuit: Sensitivity: Discriminator Peak To Peak Separation: Image Rejection: Frequency Response: MX Adapter Frequency Response: Distortion: Limiter: Antenna: Consists of a tuned grounded grid RF amplifier followed by a low noise triode mixer, 3 high gain wide band pentode IF stages and the renowned Gated Beam, zero time constant limiter. The circuit employs a wide band Foster-Seeley solid state detector, stable Colpitts oscillator and reactance type AFC circuit. Multiplex section has a two stage subcarrier, main carrier triode amplifier followed by a 19 KC synchronous oscillator, m-derived L-R filter, High Q L+R filter, dual phase L-R detector and precision matrix. 3.2 microvolts IHFM (usable sensitivity 0.95 microvolts for 20 db of quieting.) 1 megacycle, ultra linear. 45 DB. ±-1 db 10-35,000 cycles per second. ±1 db 15-15,000 cycles per second. Unmeasurable at 30% modulation. Less than 0.1% at 100% modulation. Gated beam constant output. 300 ohms. AM Circuits: Sensitivity: Selectivity: Image Rejection: IF Rejection: Low noise high gain RF pentode followed by a heptode converter, wide band IF stage and a high perveance tube detector with quick action AVC. Special litz wire high-Q loopstick. 80 microvolts per meter. Terminal sensitivity 10 my. 10 kc bandwidth. 6 db down. 50 db. 55 db. Dimensions: Power Consumption: Finish: Shipping Weight: GENERAL SPECIFICATIONS 1514/ "W x 5-7/16"H x 1112/ "D (Excluding Knobs). 50 watts. Brushed gold escutcheon. 25 pounds. 2