Harman Kardon TA600 Owners Manual - Page 7
Ta600, Specifications
View all Harman Kardon TA600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
TA600 SPECIFICATIONS Power Output Power Bandwidth Frequency Response System Rise Time Square Wave Tilt Total Harmonic Distortion Intermodulation Distortion Damping Factor Input Impedance Input Sensitivity S/N Phono Overload RIAA Equalization Crosstalk Tone Control Effect Contour Usable Sensitivity Ultimate S/N Ratio Capture Ratio Alternate Channel Selectivity Image Rejection Spurious Response Rejection IF Rejection MPX Separation MPX THD AMPLIFIER SECTION 38 WATTS MIN RMS PER CHANNEL. BOTH CHANNELS DRIVEN INTO 8 OHMS FROM 20Hz TO 20kHz WITH LESS THAN 0.3% THD From 10Hz to 40kHz at less than 0.3% THD into 8 ohms, both channels driven simultaneously at 19 watts per channel. 20Hz to 20kHz±0.5dB Less than 3 microseconds. Less than 10% at 20Hz. Less than 0.3% from 250 milliwatts to 38 watts RMS, both channels driven simultaneously into 8 ohms from 20Hz to 20kHz. 0.12% (SMPTE) at rated power output. Greater than 30. PREAMP SECTION Phono 47K AUX 30K Tape Mon 30K Phono 2.6mV AUX 180mV Tape Mon 180mV Phono AUX Tape Mon Residual -60dB -75dB -75dB -75dB 80mV ±1.5dB Phono AUX 35dB 40dB Tape Mon 40dB ±12dB @ 50Hz ±12dB @ 10kHz -10dB @ 50Hz (40dB below full power output) TUNER 2.5 microvolts, IHF 60dB 2.5 dB 60dB -50dB -60dB -70dB Greater than 35dB 0.6% (mono) 0.7% (stereo)