Harman Kardon TC600 Owners Manual - Page 7
Installation precautions
![]() |
View all Harman Kardon TC600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Installation precautions Disconnect the negative (-) battery terminal before beginning your installation, and do not reconnect it until all connections have been made and you are completely finished with your installation. As the very last step before reconnecting the battery, connect the positive power lead (sometimes referred to as B+) from the amplifier to the battery terminal. Important: To prevent serious shortcircuits that can do major damage (including potential for fire), you must install a fuse within 18" of the positive (+) battery terminal on the positive B+ power lead to the amplifier. (See the "Connections" section for information about fuse size). Make sure that the inlets and outlets for the amplifier's cooling fan are unobstructed. You must install the amplifier in such a way as to allow free air flow through the cooling tunnel to ensure that the amplifier will be able to dissipate its heat. Pay particular attention to the power ratings of the speakers you choose. Many speakers are not capable of handling the high power produced by the TC Series amplifiers. Match your speakers to the power ratings of the amplifier(s) you will be using, and never operate your speakers at higher levels than specified.
![](/manual_guide/products/harman-kardon-tc300-owners-manual-f65d5a1/7.png)