Harman Kardon THIRTY Owners Manual - Page 2
Connections
View all Harman Kardon THIRTY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Congratulations on your purchase of a harman/kardon speaker system. Your choice of a harman/kardon loudspeaker shows that you demand quality reproduction in your sound system. A thorough understanding of modern performance requirements, along with our commitment to using the best components ensures you a high performance, superbly designed and finished product representing true and lasting value. We recommend that you take the time to read this manual. This will assist you in the set-up of your speakers, and help you realise many years of quality listening pleasure. Should you have any additional questions, please contact your dealer. He is able and willing to aid you in getting the best from your system. CONNECTIONS 1. Turn off your amplifier Turning off your amplifier when connecting your speakers prevents accidents like short circuits which can damage your system. You should never change any connections without turning your system off. 2. Choose a quality speaker wire It is important to choose a quality speaker wire to ensure top performance. This is especially true if your amplifier and speakers are far apart. Specialty cables are available from your HiFi dealer for this purpose. Should these not be available or if you should choose to use regular wire, please follow the chart below in selecting the correct gauge. up to 15 ft. (5m) 15-30 ft. (5 to 10m) over 30 ft. (10m +) 16 ga.( 1.3 mm) 14 ga.( 1.6 mm) 12 ga.( 2.0 mm) 3. Wiring it right On the back of your speakers, you will see two terminals, red and black. The red terminal must connect to the positive terminal (+ve) of the amplfier, while the black must connect to the negative (-ve). If one of these connections is reversed, bass output will drop dramatically. In this condition, the speakers are out of phase. If both speakers are connected in reverse, bass output remains constant, but absolute phase is lost. For further explanations of these terms, contact your dealer. Your harman/kardon speakers have been designed to provide a large listening "window", making their positioning in a room fairly simple. However, some fundamental acoustic rules should be adhered to, to ensure top performance. Set your speakers 6-12 feet apart, depending on room size. If possible place them facing the long end of the room. The best listening area will extend approximately the same distance in front of the speakers. Both speakers should be the same height off the floor. In most situations the speakers should be slightly angled in towards each other. Experiment. PLACEMENT