Hayward LMCUS11KIT eLITLEDWFDG20 Lighting-and-Water-Features-Design-Guide down - Page 4

Lighting Overview MINIMUM ILLUMINANCE » Depending on the local health code, incandescent lights were historically required to provide 0.5 or 1 watt per square foot of pool surface area » Today, most health departments and the Model Aquatic Health Code suggest 8-9 lumens per square foot » This value only applies to lights using a white wavelength CALCULATE NUMBER OF LIGHTS NEEDED Pool Surface Area x 8 Lumens Number of Lights = Lumen Output of Light LIGHTING PLACEMENT » Beam pattern: The angular spread of light emitted from the fixture » The beam pattern is measured between points on opposite sides of the beam axis where the intensity drops to 50% of maximum power » X-axis: Horizontal spread » Y-axis: Vertical spread BEAM ANGLE 100 200 300 BEAM DISTANCE 400 337.5 22.5 500 TRANSFORMER REQUIREMENTS PRODUCT UCL ColorLogic® Pool Light PART NUMBER LPCUS/LPCUN MAX LIGHTS PER 70W MAC LIGHTS PER 140W MAX LIGHTS PER 300W WATTS J-BOX TRANSFORMER (2/70) TRANSFORMER TRANSFORMER (USE 14V) AMPS 70 1 2 3 5 UCL ColorLogic Spa Light LSCUS/LSCUN 35 2 4 9 2.5 1.5" ColorLogic 320 LACUS 23 3 5 9 1.64 1.5" ColorLogic 180 LYCUS 13 3 5 15 0.93 0.5" ColorLogic 80 LMCUS 2.6 8 12 15 0.2 0.5" ColorLogic 40 LNCUS 1.3 15 20 25 0.1 ColorLogic 80 & 40 Driver (Up to 5 lights per driver) LMCUSPS UCL CrystaLogic® Pool Light (500W Equivalent) UCL CrystaLogic Pool Light (300W Equivalent) UCL CrystaLogic Pool Light (100W Equivalent) 1.5" CrystaLogic 320 LPWUS LPLUS LSLUS LAWUS 13 (80s) 2 Drivers 6.5 (40s) (10 Lights) 70 1 70 1 35 1 25 2 4 (2 +2 Drivers) (20 Lights) 2 2 2 5 13 Drivers (65 Lights) 3 3 6 6 1 (80s) 0.5 (40s) 5.4 5 2.5 1.78 1.5" CrystaLogic 160 LYWUS 15 3 5 6 1.07 4