Hayward MaxFlo VS 500 Omni VS Omni Automation Control Operation Manual - Page 34

1. Determine your current MSP firmware version using the Sysinfo button. con g upgrade daylight sysinfo factory reset calibrate SERVICE MODE main screen light mode component MSP MP Relays EcoStar pump EcoStar pump msp id:3233 HUA 0-0-0-0 1-65-0-2a-d4 3-10-0-0-1 10-0-0-0-4e 10-0-0-0-54 SYSTEM INFO current firmware version version R2.0.0 R.1.0.2 R.1.0.2 R.3.0.4 R.3.0.4 2. Using an ordinary web browser, go to www.hayward.com/firmware and compare the latest available version on the web to the current firmware version. If the firmware version on the web is greater (number is larger) than your current version, upgrade your VS Omni's firmware. con g upgrade daylight sysinfo factory reset calibrate SERVICE MODE main screen light mode Upgrade from Internet Upgrade from USB Upgrade Firmware Firmware can be upgraded automatically through the internet (versions 4.0.0 or later) or manually using a thumb drive. Refer to the following information for both methods. Upgrade from Internet (Date/Time must be selected to be set automatically prior to upgrading firmware from internet- see page 30.) VS Omni pool controls using firmware revision 4.0.0 and later can be upgraded through the internet. Previous versions must be upgraded manually using the USB thumbdrive method described on page 34. Once updated to 4.0.0 or later, the VS Omni will alert you of available firmware updates. Note that you can select individual devices to be upgraded by touching the component name or you can upgrade all components using the "Upgrade All" button. It is recommended to upgrade all components at the same time. Upgrade from Internet Upgrade from USB Upgrade All select device Component MSP MP Wired Term HUA 05-ff-ff-ff 90-31-03-42-35 a0-41-03-41-28 Current Version Available X 4.0.19-001 X 4.0.20-MSP X 4.0.19-001 X 4.0.20 X 4.0.19-001 X 4.0.20-TRM Upgrade Firmware COMPONENT selection 33 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS