HealthRider 15.5 S Elliptical Canadian English Manual - Page 7
Button Bolts yet.
View all HealthRider 15.5 S Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4. While another person holds the Console (23) in the position shown, connect the console wire to the Extension Wire (68). Attach the Console (23) to the Upright (2) with the four Console Screws (59) included with the Console. Be careful to avoid pinching the wires. Attach the Water Bottle Holder (29) to the Upright (2) with two M4 x 22mm Screws (63). 4 23 Console Wire 59 2 68 29 63 5. While another person holds the Upright (2) in the position shown, connect the Extension Wire (68) to the Lower Wire Harness (73). Push the Extension Wire (68) and the Lower Wire Harness (73) down into the Frame (1). Slide the Upright (2) onto the Frame. Be careful to avoid pinching the Wires. Attach the Upright with two M10 x 74mm Button Bolts (7), two M10 Split Washers (45), and two M10 Nylon Locknuts (33). Do not tighten the Button Bolts yet. 5 2 Make sure the wires do not get 45 pinched and 7 damaged during 33 this step 68 73 1 7