HealthRider 8.5ex Crosstrainer Elliptical English Manual - Page 5

ASSEMBLY To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480. Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included hex keys, assembly requires a phillips screwdriver , an adjustable wrench , and a rubber mallet . As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled. Star Washer M4 x 13mm M6 Split M8 x 15mm x 4.5mm M8 Split Wave Washer (100)-3 Washer (93)-2 Washer (88)-8 Washer (99)-4 Washer (72)-4 (98)-8 M10 x 20mm x M10 x 20mm x M10 x 20mm x 1mm Washer 1.5mm Washer 2mm Washer (81)-2 (84)-2 (92)-4 M10 x 25mm M8 Nylon M10 Nylon Washer (94)-4 Locknut (96)-4 Locknut (97)-2 M4 x 16mm M4 x 16mm Self-tapping Screw (86)-8 Screw (79)-16 M6 x 35mm Phillips Screw (87)-8 M8 x 42mm Bolt (71)-4 M8 x 16mm Button Screw (95)-3 M8 x 75mm Button Screw (107)-4 M10 x 20mm Button Screw (91)-4 M10 x 23mm Shoulder Screw (80)-8 M10 x 62mm Bolt (89)-2 M10 x 78mm Button Screw (90)-2 5