HealthRider E330 English Manual - Page 14
Maintenance And Trouble-shooting
View all HealthRider E330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
MAINTENANCE AND TROUBLE-SHOOTING Inspect and tighten all parts of the elliptical crosstrainer regularly. Replace any worn parts immediately. For smooth operation of the elliptical Incline Frame crosstrainer, the incline frame should be kept clean. Using a soft cloth and mild detergent, Wheel clean dust and other residue from the incline frame where the wheels make contact with it. Other parts of the elliptical crosstrainer can also be cleaned in this manner. Never use abrasives or solvents. LUBRICATING THE INCLINE BRACKET The incline bracket and the bolt on which it pivots should be Bolt regularly lubricat- ed. Apply a small amount of the included lubricant to the bolt and between the bracket and the upright. Upright Incline Bracket HOW TO LEVEL THE ELLIPTICAL CROSSTRAINER If the elliptical crosstrainer does not sit flat on the floor, one or both of the leveling pads Jam Pad Nut should be adjusted. First, loosen the jam nut on each leveling pad. Next, turn the leveling pads as needed until the elliptical crosstrainer is level. When the leveling pads are prop- erly adjusted, firmly retighten the jam nuts. PULSE SENSOR TROUBLE-SHOOTING • Avoid moving your hands while using the pulse sensor. Excessive movement may interfere with heart rate readings. • Do not hold the metal contacts too tightly; doing so may interfere with heart rate readings. • For the most accurate heart rate reading, hold the metal contacts for about 15 seconds. • For optimal performance of the pulse sensor, keep the metal contacts clean. The contacts can be cleaned with a soft cloth-never use alcohol, abrasives, or chemicals. 14