HealthRider H190t Treadmill English Manual - Page 14
/4 Patch Bolt 6 and a 3/8 Nut 12. Note:
View all HealthRider H190t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
15. IMPORTANT: See page 17 and plug in the power cord. Next, see page 19 and turn on 15 the power. See page 29; follow steps 1 through 3 to calibrate the incline of the treadmill. When the frame stops moving, remove the key from the console and unplug the power cord. IMPORTANT: Make sure to follow all instructions in this step. 16. Raise the Frame (57) to the position shown. 16 Have a second person hold the Frame until this step is completed. Orient the Storage Latch (58) so that the large barrel and the latch knob are oriented as shown. Attach the lower end of the Storage Latch (58) to the Base (91) with a 3/8" x 2" Bolt (3) and a 3/8" Nut (12). Attach the upper end of the Storage Latch (58) to the bracket on the Frame (57) with a 3/8" x 1 3/4" Patch Bolt (6) and a 3/8" Nut (12). Note: It may be necessary to move the Frame back and forth to align the Storage Latch with the Frame. 57 12 6 Latch Knob 58 Large Barrel 91 12 3 14