HealthRider H50e Elliptical English Manual - Page 14
Attach the Rear Upright Cover 81 to the Upright - parts
View all HealthRider H50e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
13. Apply a small amount of grease to one of the Pedal Arm Axles (64). 13 Next, slide an M8 Washer (97) and an Axle Spacer (77) onto an M8 x 13mm Screw (82), and tighten the Screw a few turns into the Pedal Arm Axle (64). While a second person holds the front end of the Right Pedal Arm (58) inside the bracket on the Right Upper Body Leg (60), insert the Pedal Arm Axle (64) into both parts. 46 Slide an M8 Washer (97) and an Axle Spacer (77) onto another M8 x 13mm Screw (82), and tighten the Screw a few turns into the Pedal Arm Axle (64). Then, tighten both Screws at the same time. Repeat this step on the other side of the elliptical. 82 97 77 60 Grease 64 77 97 82 58 14. Orient the Rear Upright Cover (81) as shown. 14 Attach the Rear Upright Cover (81) to the Upright 117 (4) with four M4 x 16mm Screws (101). Orient the Front Upright Cover (117) as shown. Attach the Front Upright Cover (117) around the Upright (4) by pressing the hooks on the Rear Upright Cover (81) onto the tabs on the Front Upright Cover. 101 4 81 14