HealthRider H90t Treadmill English Manual - Page 8
Attach a Wheel 91 to an Extension Leg 88
View all HealthRider H90t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3. With the help of a second person, hold the right Upright (77) near the Base (83) as shown. See the inset drawing. Tie the wire tie in the right Upright (77) securely around the end of the Upright Wire (76). Then, pull the other end of the wire tie until the Upright Wire is routed through the right Upright. 3 76 Wire Tie 77 83 77 76 Wire Tie 4. Orient the right Upright (77) with the bend in the plate positioned as shown. 4 Attach the right Upright (77) to the Base (83) with a 3/8" x 2 3/4" Bolt (7), a 3/8" x 1" Patch Bolt (8), and two 3/8" Star Washers (11); do not fully tighten the Bolts yet. Be careful not to pinch the Upright Wire (76). Plate 77 76 83 11 87 5. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (51) so the treadmill is more stable. Do not fully fold the Frame until the treadmill is completely assembled. 5 77 11 83 Orient the left Upright (77) with the bend in the plate positioned as shown. Attach the left Upright (77) to the Base (83) with a 3/8" x 2 3/4" Bolt (7), a 3/8" x 1" Patch Bolt (8), and two 3/8" Star Washers (11); do not fully tighten the Bolts yet. 7 8 Attach a Wheel (91) to an Extension Leg (88) with a 3/8" x 2 3/4" Bolt (7) and a 3/8" Nut (12). Do not overtighten the Nut; the Wheel must turn freely. With the help of a second person, tip the treadmill so that the Base (83) is flat on the floor. 8 Plate 7 88 91 12 51