HealthRider Hotel Fitness Xs9800-e Elliptical English Manual - Page 6
How To Use The Strider, Danger
View all HealthRider Hotel Fitness Xs9800-e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
HOW TO USE THE STRIDER HOW TO PLUG IN THE AC POWER ADAPTER This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the AC power adapter into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. This product is for use on a nominal 120-volt circuit. IMPORTANT: The strider is not compatible with GFCI-equipped outlets and may not be compatible with AFCI-equipped outlets. HOW TO MOVE THE STRIDER Due to the size and weight of the strider, moving it requires two persons. Have two persons lift the indicated end of the strider until the strider will roll on the front wheels. Carefully move the strider to the desired location and then lower it to the level position. CAUTION: To decrease the risk of injury, bend your legs and keep your back straight. Make sure to use your legs rather than your back to lift the strider. Do not attempt to move the strider over an uneven surface. DANGER: Improper connection of the equipment-grounding conductor can result in an increased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product-if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Wheel A temporary adapter may be used to connect the AC power adapter to a 2-pole receptacle as shown below if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. The green- colored rigid ear, lug, or Grounded Outlet Box the like Adapter extending from the adapter must AC Power Adapter be connected to a Lug permanent Metal Screw ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw. Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified electrician to deter- mine if the outlet box cover is grounded before using an adapter. Lift here 6