HealthRider N35 Bike English Manual - Page 6
the Rear Frame 2 as shown. Attach the Seat Frames
View all HealthRider N35 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
5. Have another person hold the Seat Frames (7) under 5 the Rear Frame (2) as shown. Attach the Seat Frames and the Seat (12) to the Rear Frame with four M6 x 42mm Button Screws (49) and four M6 Washers (55). See step 3. Tighten the two M8 x 70mm Button Bolts (54). See step 4. Tighten the four M6 x 38mm Button Screws (48). 12 2 55 49 55 7 49 55 6. The Console (16) requires four D batteries (not included); alkaline batteries are recommended. Press the 6 16 tab on the battery door and remove it. Insert four bat- teries into the Console as shown. Make sure that the batteries are oriented as shown by the markings on the battery door. Reattach the battery door. Batteries Tab 7. Connect the console wire harness to the Upper Wire 7 Harness (36). Insert the console wire harness into the Upright (13). Attach the Console (16) to the Upright with four M4 x 16mm Round Head Screws (52). Battery Door Console Wire Harness 52 16 36 13 6