HP 10/100 3Com 3C905B-TX 3COM LAN cards (D6500A, D6509A), Installation Guide - Page 15
Software Installation and Update on a Windows NT 4.0 System - network driver
View all HP 10/100 3Com 3C905B-TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide Software Installation Procedure 5 Double-click on Network Adapters. The name of the installed network interface card appears: 3Com EtherLink XL Adapter (3C905B). If this name does not appear or if a yellow exclamation mark appears next to it, follow this troubleshooting procedure: a In the Device Manager window, double-click on Other Devices. b Click PCI Ethernet Controller or the duplicate 3C905B-TX NIC entry. c Click on Remove. d Restart your PC. Software Installation and Update on a Windows NT 4.0 System This section describes how to install the network driver in a PC workstation running Windows NT version 4.0. Before you begin, obtain EtherDisk diskette #2 and Windows NT installation files (stored under C:\I386 on systems preloaded with Windows NT 4.0). If Windows NT networking is not installed, you may also need the following information from your MIS department: • Whether you are on a LAN or are connecting to one through a modem • The protocol used in the Microsoft Windows Network (typically TCP/IP or NetBEUI) • The name of the Windows NT server domain or workgroup you belong to • Your IP address if you are not using DHCP English 11