HP 10622 Plinth Rack Option Kit Installation Instructions - Page 1
HP 10622 Manual
View all HP 10622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
HP Plinth Rack Option Kit Installation Instructions About this Device The HP Plinth Rack Option Kit enables you to secure HP 10000 Series racks to the floor. Kit Contents The items and quantities required for installation include: • Plinth front and rear assembly pieces (2) • Plinth side assembly pieces (2) • M8 hex nuts (8) • Internal serrated lock washers (8) • External serrated lock washers (4) • M12 x 25 mm long screws (4) • Eyebolts (4) Tools Required The following tools are required for installation: • M8 hex wrench • M13 socket wrench • T-30 Torx driver Rack Considerations Before beginning these procedures, be sure you follow and understand these precautions: WARNING: To reduce the risk of personal injury or damage to the equipment be sure that: • The leveling feet are removed. • The stabilizing feet are removed. • The casters are removed. • The front and rear doors are closed and locked. Read instructions completely before beginning installation procedure. © 2003 Hewlett-Packard Development Company, L.P. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided "as is" without warranty of any kind and is subject to change without notice. The warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. HP Plinth Rack Option Kit Installation Instructions Second Edition (September 2003) Part Number 251374-022 251374- 022