HP 10647 Best practices for HP 10000 Series and HP 10000 G2 Series Racks - Page 27

NOTE Each of the packing and unpacking procedures takes less than one-half hour and requires at least two people to complete. NOTE The 10000 and 10000 G2 Series Racks use different shock pallets. If a rear extension is installed on the 10000 G2 Series Rack, a specific shock pallet is required to accommodate the dimensions of the rack and attached rear extension. The 10000 Series Rack with extension is not supported in the CTO shipping environment. An HP shock pallet spares kit is recommended and can be obtained when moving a data center or relocating pre-configured racks. Contact your local HP reseller for information on spares kits. NOTE The 10000 Series Rack Model 10647 is not available on a shock pallet due to safety and stability concerns. NOTE All wood components of these pallets have been properly treated to comply with the pest-free certifications required by foreign countries. Horizontal crate 10000 and 10000 G2 Series Racks ship in an enclosed horizontal crate. The enclosed horizontal crate provides greater protection for the empty rack during airfreight transport and other rugged transportation modes. NOTE Horizontally crated racks do NOT support configured racks. NOTE The 10000 Series Rack Models S10614 and 10842 are not available for shipment in a horizontally crate. Vertical crate for rack options If specially ordered, 10000 G2 Series 42U and 36U racks can be shipped in a vertical crate. The rack must include factory installed option in the customer order to qualify for shipment in the vertical crate. The rack ships on a CTO shock pallet and is enclosed in a wooden crate. The vertical crate provides greater protection for the configured rack during airfreight transport and other rugged transportation modes. NOTE All wood components of these pallets have been properly treated to comply with the pest-free certifications required by foreign countries. 25