HP 1105 Illustrated Parts & Service Map HP Pro 1105 Series All-in-One Busi - Page 2

Boards. memory processors 1 System board with AMD E1-1200 processor, USB 3.0 (includes 703642-001 heat sink, gasket, processor, replacement thermal material) 2 Inverter board 710541-001 3 Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo 701399-001 Adapter (WLAN module) * Ralink RT5390R 802.11bgn 1x1 Wi-Fi Adapter (WLAN module) 701396-001 4 Webcam module, 720p HD 710544-001 5 4-GB memory module (PC3-12800, SODIMM) 689373-001 * 2-GB memory module (PC3-12800, SODIMM) 689372-001 * 1-GB memory module (PC3-10600, SODIMM) *not illustrated 646808-001 System Board System Board Components INVERTER Inverter board connector LVDS Display connector WEBCAM Webcam connector JDDR2 Memory slot, channel B JDDR1 Memory slot, channel A WLAN Mini PCIe slot CARD READER Card reader BATTERY RTC battery slot USB USB ports JMIC1 Microphone (line in) connector HEADPHONE Headphone (line out) connector LINE OUT Line out connector JSPKL1 Left speaker connector JSPKR1 Right speaker connector LAN1 RJ-45 network connector USB USB port DC INPUT AC power connector HDD POWER Hard drive power connector SATA HDD Hard drive data connector SATA ODD Optical drive data connector ODD PWR Optical drive power connector SYSTEM FAN Fan connector CLR_ Password jumper PASSWORD CLR_CMOS CMOS jumper System Setup and Boot Access the Setup Utility during computer boot by pressing the F10 key. If you do not press F10 at the appropriate time, you must restart the computer and again press F10 when the monitor light turns green. NOTE: Not all settings are available for all models. Computer Setup Menu Heading Option/Description File System Information - Lists the following main system specifications: • Product name • System BIOS • SKU number (some models) • Chassis serial number • Processor type/speed/stepping • Asset tracking number • Cache size (L1/L2/L3) • ME firmware version • Installed memory size/speed/ch • ME management mode • Integrated MAC Address About - Displays copyright notice. Set Time and Date - Allows you to set system time and date. Replicated Setup - Allows you to save or restore system configuration to/ from a USB flash drive. Default Setup - Allows you to save current settings as default or restore factory settings as default. Apply Defaults and Exit - Applies the selected default settings and clears any established passwords. Ignore Changes and Exit - Exits Computer setup without saving changes. Save Changes and Exit - Saves changes to system configuration or default settings and exits Computer Setup. Storage Device Configuration - Lists all installed BIOS-controlled storage devices. The following options are available: • CD-ROM • Hard Disk • Default Values • Translation Mode • SSD Life Used • SMART (ATA disks only) • Diskette • SATA Defaults Storage Options - Allows you to set: • eSATA Port - Set SATA port as eSATA port for use with external drive. • SATA Emulation - Choose how the SATA controller and devices are accessed by the OS. SATA Emulation choices are AHCI, RAID, or IDE. • Removable Media Boot - Enables/disables ability to boot the system from removable media. • Max eSATA Speed - Allows you to choose 1.5 Gbps or 3.0 Gpbs as the maximum eSATA speed. By default, the speed is limited to 1.5 Gbps for maximum reliability. DPS Self-Test - Execute self-tests on ATA hard drives capable of performing the Drive Protection System (DPS) self-tests. Boot Order - Specify boot order for UEFI and legacy boot sources. Also specify hard drive boot order. • Shortcut to Temporarily Override Boot Order Security Setup Password - Set and enable the setup (Admin) password. Power-On Password - Set and enable power-on password. Password Options - Allows to you enable/disable: • Lock Legacy Resources • Setup Browse Mode • Password prompt on F9 & F12 • Network Server Mode Smart Cover - Allows you to lock/unlock the smart cover and set the cover removal sensor to disable/notify user/setup password. Device Security - Set Device Available/Device Hidden for: embedded security device, system audio, network controller, USB controller, serial/parallel ports, and SATA ports. USB Security - Set Device Available/Device Hidden for front USB ports, rear USB ports, internal USB ports, accessory USB ports. Slot Security - Disable the PCI, PCIe, and Mini Card slots. Network Boot - Enables/disables boot from OS (NIC models only). System IDs - Allows you to update asset tag, ownership tag, UUID, keyboard locale setting. Master Boot Record Security - enables/disables MBR. System Security - Allows you to set: • Data Execution Prevention (enable/disable) • SVM CPU Virtualization (enable/disable). • Virtualization Technology (VTx) (enable/disable) • Virtualization Technology/Directed IO (VTd) (enable/disable) • Trusted Execution Technology (enable/disable) • Embedded Security Device (enable/disable) • Reset to Factory Settings (Do not reset/Reset) • Measure boot variables/devices to PCR1 (enable/disable) • OS management of Embedded Security Device (enable/disable) • Reset of Embedded Security Device through OS (enable/disable) • No PPI provisioning (Windows 8 only; enable/disable) • Allow PPI policy to be changed by OS (enable/disable) DriveLock Security - Allows you to assign or modify a master or user password for hard drives. Secure Boot Configuration (Windows 8 only) • Legacy Support (enable/disable) • Secure Boot (enable/disable). • Key Management (enable/disable) • Fast Boot (enable/disable) Power OS Power Management - Allows you to enable/disable Runtime Power Management, Idle Power Savings, Unique Sleep State Blink Rates. Hardware Power Management - Enable/disable SATA power management, S5 maximum power savings., PCI slots, network controller, USB 3.0 controller Thermal - Control minimum fan speed. Advanced Power-On Options - Allows you to set: • POST mode (QuickBoot, Clear Memory, FullBoot, or FullBoot Every x Days) • POST messages (enable/disable) • Press the ESC key for Startup Menu (enable/disable) • Option ROM Prompt (enable/disable) • After Power Loss (off/on/previous state) • POST Delay (none, 5, 10, 15, 20, or 60 seconds) • Remote Wakeup Boot Source (remote server/local hard drive) • Factory Recovery Boot Support (enable/disable) • Bypass F1 Prompt on Configuration Changes (enable/disable) BIOS Power-On - Set the computer to turn on at a preset time. HP Pro 1105 Series All-in-One Business PC 713370-001 page 2