HP 1120NR HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guide - Page 63
Remove the actuators, that secure the actuators for the power switch
UPC - 884420800767
View all HP 1120NR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
3. Disconnect the following cables from the system board: (1) Speaker cables (2) Microphone cable (3) Fan cable (4) Power cable (5) Display panel cable 4. Remove the two Phillips PM1.6×2.5 screws (1) that secure the actuators for the power switch and wireless on/off switch to the system board. 5. Remove the actuators (2). NOTE: The actuators are included in the Bracket Kit, spare part number 507318-001. 6. Remove the two Phillips PM2.0×3.0 screws (1) that secure the USB connector bracket to the base enclosure. Component replacement procedures 55
3.
Disconnect the following cables from the system board:
(1)
Speaker cables
(2)
Microphone cable
(3)
Fan cable
(4)
Power cable
(5)
Display panel cable
4.
Remove the two Phillips PM1.6×2.5 screws
(1)
that secure the actuators for the power switch and
wireless on/off switch to the system board.
5.
Remove the actuators
(2)
.
NOTE:
The actuators are included in the Bracket Kit, spare part number 507318-001.
6.
Remove the two Phillips PM2.0×3.0 screws
(1)
that secure the USB connector bracket to the base
enclosure.
Component replacement procedures
55