HP 1250 Fax User Guide - Page 65
Hold the print cartridge by its sides., any excess water from it.
View all HP 1250 Fax manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 7 The print carriage moves to the far right side of the HP Fax. 2. Wait until the print carriage is idle and silent, and then unplug the power cord from the back of the HP Fax. Note Depending how long the HP Fax is unplugged, the date and time might be erased. You might need to reset the date and time later, when you plug the power cord back in. 3. Lightly press down on the print cartridge to release it, and then pull it toward you out of the slot. Note Do not remove both print cartridges at the same time. Remove and clean each print cartridge one at a time. Do not leave a print cartridge outside the HP Fax for more than 30 minutes. 4. Inspect the print cartridge contacts for ink and debris buildup. 5. Dip a clean foam rubber swab or lint-free cloth into distilled water, and squeeze any excess water from it. 6. Hold the print cartridge by its sides. 7. Clean only the copper-colored contacts. Allow the print cartridges to dry for approximately ten minutes. Maintain the HP Fax 1 Copper-colored contacts 2 Ink nozzles (do not clean) 8. Slide the print cartridge back into the slot. Push the print cartridge forward until it clicks into place. 9. Repeat if necessary for the other print cartridge. 10. Gently close the print cartridge door and plug the power cord into the back of the HP Fax. 62 HP Fax 1250 series