HP 1410 Setup Guide - Page 2
Attach the control panel overlay if not attached, Connect the power cord and adapter
![]() |
UPC - 829160867878
View all HP 1410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
4 Attach the control panel overlay (if not attached) a Bend the bottom of the control panel overlay. b Remove the bottom tab and the backing from the overlay. c Lift the lid. Attach the overlay to the device. d Press down on the overlay to ensure it is firmly attached. CAUTION: The control panel overlay must be attached for the HP All-in-One to work! 5 Connect the power cord and adapter Important: Do not connect the USB cable until instructed later in this guide. 2 • HP All-in-One
![](/manual_guide/products/hewlettpackard-1410-setup-guide-62b026b/2.png)
4
5
2 • HP All-in-One
Attach the control panel overlay (if not attached)
a
Bend the bottom of the
control panel overlay.
c
Lift the lid. Attach the overlay to the device.
d
Press down on the overlay to ensure it is
firmly attached.
b
Remove the bottom tab and the
backing from the overlay.
Connect the power cord and adapter
Important:
Do not connect the USB cable until
instructed later in this guide.
CAUTION:
The control panel overlay must be attached for the HP All-in-One to work!