HP 15-af000 Maintenance and Service Guide - Page 42
the display bezel until the bezel disengages from the display enclosure.
View all HP 15-af000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Before removing display subcomponents while the display assembly is still attached to the computer, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 30). To remove the display bezel, webcam/microphone module, and raw display panel: 1. Position the computer upright with the front toward you, and then open it. 2. Flex the left and right sides (1), the inside of the bottom edge (2), and the inside of the top edge (3) of the display bezel until the bezel disengages from the display enclosure. 3. Remove the display bezel (4). 4. To remove the webcam/microphone module: a. Position the display assembly with the top edge toward you. b. Disconnect the cable (1) from the module. 34 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts