HP 15-bs100 Maintenance and Service Guide 1 - Page 61
Hard drive and hard drive connector board, Remove the Phillips PM2.0×3.0 screw
View all HP 15-bs100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Hard drive and hard drive connector board NOTE: The hard drive spare part kit does not include the hard drive bracket, cable, or connector board. Description Hard drives: 2-TB, 5400-rpm 1-TB, 5400-rpm 500-GB, 5400-rpm Hard drive bracket Spare part number 912487-855 778192-005 778186-005 924980-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34). 5. Remove the optical drive (see Optical drive on page 36), if installed. 6. Remove the bottom cover (see Bottom cover on page 45). To remove the hard drive: 1. Remove the Phillips PM2.0×3.0 screw (1) that secures the hard drive assembly to the computer. 2. Lift the rear of the hard drive upward (2). Component replacement procedures 53