HP 15-bs500 Maintenance and Service Guide 1 - Page 69
USB board
View all HP 15-bs500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
USB board Description USB board USB board cable Spare part number 924991-001 924929-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34). 5. Remove the optical drive (see Optical drive on page 36), if installed. 6. Remove the bottom cover (see Bottom cover on page 45). 7. Remove the speakers (see Speakers on page 60). To remove the USB board: 1. Disconnect the USB board cable from the USB board (1). 2. Remove the Phillips PM2.0×3.0 screw (2) that secures the USB board to the computer. 3. Remove the USB board (3). Reverse this procedure to install the USB board. Component replacement procedures 61