HP 15-d081nr HP 15 Notebook PC HP 15 TouchSmart Notebook PC Compaq 15 Notebook - Page 64
Optical drive, Remove the Phillips PM2.5×6.5 screw
View all HP 15-d081nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Optical drive Description DVD+/-RW Double-Layer SuperMulti Drive Spare part number 747125-001 Before removing the optical drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 49). 5. Remove the service door (see Service door on page 55). To remove the optical drive: 1. Remove the Phillips PM2.5×6.5 screw (1) that secures the optical drive to the computer. 2. Insert a screwdriver or similar small tool into the hole at the rear of the optical drive bay, and then push the optical drive (2) to release it from the bay. 3. Remove the optical drive (3) by sliding it out of the optical drive bay. 4. If it is necessary to replace the optical drive bracket on the rear of the optical drive, position the optical drive with the rear panel toward you. 5. Remove the two Phillips PM2.0×3.0 screws (1) that secure the bracket to the optical drive. 56 Chapter 4 Removal and replacement procedures