HP 15-f009ca HP 15 Notebook PC Maintenance and Service Guide - Page 40
Memory module, Spread the two retaining tabs
View all HP 15-f009ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Memory module Description 4 GB memory module (PC3, 12800, 1600-MHz) 2 GB memory module (PC3, 12800, 1600-MHz) Spare part number 691740-001 691739-001 Before removing a memory module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 28). 5. Remove the service door (see Service door on page 29). Remove the memory module: NOTE: Note the location of the memory module. If you are replacing it, install the new memory module in the same slot. 1. Spread the two retaining tabs (1) on each side of the memory module slot to release the memory module. (The memory module tilts up.) 2. Remove the memory module (2) by pulling it away from the slot at a 45 degree angle. Reverse this procedure to install the memory module. 30 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts