HP 15-g020nr HP 15 Notebook PC Compaq 15 Notebook PC HP 250 G3 Notebook PC HP - Page 85
Be careful not to inadvertently disconnect the speaker cable when lifting the system board.
View all HP 15-g020nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
2. Remove the two Phillips PM2.5×5.0 screws (5) that secure the system board to the computer. 3. Lift the right side of the system board (1), and then pull the board away from the computer enough to disengage the connectors from the side of the base enclosure (2). NOTE: Be careful not to inadvertently disconnect the speaker cable when lifting the system board. 4. Flip the system board upside down to gain access to the speaker connector (1). Component replacement procedures 77
2.
Remove the two Phillips PM2.5×5.0 screws
(5)
that secure the system board to the computer.
3.
Lift the right side of the system board
(1)
, and then pull the board away from the computer enough to
disengage the connectors from the side of the base enclosure
(2)
.
NOTE:
Be careful not to inadvertently disconnect the speaker cable when lifting the system board.
4.
Flip the system board upside down to gain access to the speaker connector
(1)
.
Component replacement procedures
77