HP 15-g023ds HP 15 TouchSmart Notebook PC HP 15 Notebook PC Compaq 15 TouchSma - Page 70
Disconnect the USB board cable from the system board
View all HP 15-g023ds manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
3. Lift the right side of the system board (1), and then pull the board away from the computer enough to disengage the connectors from the side of the base enclosure (2). NOTE: Be careful not to inadvertently disconnect the speaker cable when lifting the system board. 4. Flip the system board upside down to gain access to the speaker connector (1). 5. Disconnect the USB board cable from the system board (2). Reverse this procedure to install the system board. 62 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
3.
Lift the right side of the system board
(1)
, and then pull the board away from the computer enough to
disengage the connectors from the side of the base enclosure
(2)
.
NOTE:
Be careful not to inadvertently disconnect the speaker cable when lifting the system board.
4.
Flip the system board upside down to gain access to the speaker connector
(1)
.
5.
Disconnect the USB board cable from the system board
(2)
.
Reverse this procedure to install the system board.
62
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts