HP 15-g039ca HP 15 Notebook PC Compaq 15 Notebook PC HP 250 G3 Notebook PC HP - Page 58
Display subcomponents (bezel, webcam, panel), Position the computer upright with the front toward
View all HP 15-g039ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Display subcomponents (bezel, webcam, panel) This section describes removing display subcomponents that do not require that you remove the entire display assembly from the computer. You can remove the display bezel, webcam/microphone module, and display panel while the display assembly is still attached to the computer. To remove the remaining display subcomponents, you must remove the entire display assembly from the computer. See Display assembly on page 86 for more information about removing the display assembly in its entirety. Description Raw display panel, non-touch screen, for use in HP 15 and Compaq 15 models Raw display panel for use in Compaq 15 touch screen models Raw display panel for use in HP 15 touch screen models Raw display panel, touch screen, includes bezel, for use in HP 255 G3 models Raw display panel, touch screen, includes bezel, for use in HP 250 G3 models Display bezel for use with HP models Display bezel for use with Compaq models Webcam/microphone module Spare part number 750635-001 764876-001 764877-001 774167-001 774165-001 749644-001 749645-001 749654-001 Before removing display subcomponents while the display assembly is still attached to the computer, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 49). To remove the display bezel, webcam/microphone module, and raw display panel: 1. Position the computer upright with the front toward you, and then open it. 2. Flex the inside of the top edge (1), the left and right sides (2), and the bottom edge (3) of the display bezel until the bezel disengages from the display enclosure. 50 Chapter 4 Removal and replacement procedures