HP 15-g060ca HP 15 Notebook PC Compaq 15 Notebook PC Maintenance and Service G - Page 45
Optical drive, Remove the Phillips PM2.5×5.0 screw
View all HP 15-g060ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Optical drive Description DVD+/-RW Double-Layer SuperMulti Drive Spare part number 750636-001 Before removing the optical drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 33). To remove the optical drive: 1. Remove the Phillips PM2.5×5.0 screw (1) that secures the optical drive to the computer. 2. Remove the optical drive (2) by sliding it out of the optical drive bay. 3. If it is necessary to replace the optical drive bracket on the rear of the optical drive, position the optical drive with the rear panel toward you. 4. Remove the two Phillips PM2.0×3.0 screws (1) that secure the bracket to the optical drive. Component replacement procedures 37