HP 15-g085nr HP 15 TouchSmart Notebook PC HP 15 Notebook PC Compaq 15 TouchSma - Page 65
Fan, Remove the top cover see
View all HP 15-g085nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Fan NOTE: The fan spare part kit includes replacement thermal materials. Description Fan Spare part number 753894-001 NOTE: To properly ventilate the computer, allow at least 7.6 cm (3.0 in) of clearance on the left side of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software requirements. Exhaust air is displaced through the ventilation grill located on the left side of the computer. Before removing the fan/heat sink assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 35). 5. Remove the keyboard (see Keyboard on page 39). 6. Remove the top cover (see Top cover on page 47). To remove the fan: 1. Position the computer upright and open it. 2. Disconnect the fan cable (1) from the system board. 3. Remove the three Phillips PM2.5×5.0 screws (2) that secure the fan to the computer. Component replacement procedures 57