HP 15-r082nr HP 15 Notebook PC HP 15 TouchSmart Notebook PC Compaq 15 Notebook - Page 74
Be careful not to inadvertently disconnect the speaker cable when lifting the system board.
View all HP 15-r082nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
2. Remove the two Phillips PM2.5×5.0 screws (5) that secure the system board to the computer. 3. Lift the right side of the system board (1), and then pull the board away from the computer enough to disengage the connectors from the side of the base enclosure (2). NOTE: Be careful not to inadvertently disconnect the speaker cable when lifting the system board. 4. Flip the system board upside down to gain access to the speaker connector (1). 66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
2.
Remove the two Phillips PM2.5×5.0 screws
(5)
that secure the system board to the computer.
3.
Lift the right side of the system board
(1)
, and then pull the board away from the computer enough to
disengage the connectors from the side of the base enclosure
(2)
.
NOTE:
Be careful not to inadvertently disconnect the speaker cable when lifting the system board.
4.
Flip the system board upside down to gain access to the speaker connector
(1)
.
66
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts