HP 1606 Brocade Fabric OS Administrator's Guide v6.3.0 (53-1001336-01, July 20 - Page 68
Setting port names, Port identification by slot and port number
View all HP 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
2 Ports TABLE 2 Port blades Port numbering schemes for the Brocade 48000, Brocade DCX and DCX-4S enterprise-class platforms Numbering scheme FC2-16 FC4-16 FC8-16 Ports are numbered from 0 through 15 from bottom to top. FC4-32 FC8-32 FC4-48 FC8-48 FC10-6 FC4-16IP Ports are numbered from 0 through 15 from bottom to top on the left set of ports and 16 through 31 from bottom to top on the right set of ports. Ports are numbered from 0 through 23 from bottom to top on the left set of ports and 24 through 47 from bottom to top on the right set of ports. Ports are numbered from 0 through 5 from bottom to top. Fibre Channel ports are numbered from 0 through 7 from bottom to top. There are also 8 GbE ports (numbered ge0 - ge7, from bottom to top). Going from bottom to top, the 8 FC ports appear on the bottom, followed by the 8 GbE ports at the top. FA4-18 FR4-18i FS8-18 Fibre Channel ports are numbered from 0 through 15 from bottom to top. There are also 2 GbE ports (numbered A0 - A1, from top to bottom) that are for Storage Application manageability purposes; you cannot address these ports using the CLI. Ports are numbered from 0 through 15 from bottom to top. There are also 2 GbE ports (numbered ge0-ge1, from bottom to top). Going from bottom to top, the 2 GbE ports appear on the bottom of the blade followed by 16 FC ports. Ports are numbered from 0 through 15 from bottom to top. There are also 2 GbE ports (numbered ge0-ge1, from top to bottom). Going from top to bottom, the 2 GbE ports appear on the top of the blade followed by 16 FC ports. FCOE10-24 FX8-24 Ports are numbered 0 through 11 from bottom to top on the left set of ports and 12 through 24 from bottom to top on the right set of ports. In the first grouping, there are Fibre Channel ports numbered 0 through 5 from bottom to top on the left set of ports and 6 through 11 from bottom to top on the right set of ports. In the second grouping, there are two 10 GbE ports numbered xge0 and xge1 on the left set of ports and two GbE ports numbered ge4 and ge5 on the right side. In the third grouping, the GbE ports are numbered ge0 through ge3 on the left set of ports and ge6 through ge9 on the right set of ports. Setting port names Perform the following steps to specify a port name. For enterprise-class directors, specify the slot number where the blade is installed. 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the portName command. Example of naming port 0. ecp:admin> portname 1/0 trunk1 Port identification by slot and port number The port number is a number assigned to an external port to give it a unique identifier in a switch. 26 Fabric OS Administrator's Guide 53-1001336-01