HP 166207-B21 Advanced Data Guarding User Guide - Page 24
Windows NT and Windows 2000, NetWare, Click Save Configuration on the Controller menu.
UPC - 720591292225
View all HP 166207-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
System Setup 3-9 To change the stripe size, carry out the procedure described for your operating system in one of the following sections. Windows NT and Windows 2000 1. Check that you have the latest version of the configuration utility by visiting the Compaq website (www.compaq.com). Download and install the newer version if necessary. An ACU program icon will automatically be generated on the desktop. 2. Double-click the ACU icon. 3. Select the logical drive to be reconfigured from the left-hand side of the main ACU screen. 4. Click the Migrate button in the Logical Drive section on the right-hand side of the main ACU screen. 5. Change the stripe size. 6. Click the Done button. 7. Click Save Configuration on the Controller menu. 8. Click Exit on the Controller menu. NetWare 1. Check that you have the latest support pack or operating system patch from the Novell website installed on your system. 2. Check that you have the latest drivers for the Smart Array 5300 from the Compaq website installed on your system. 3. Open the CPQONLIN utility. 4. On the Main Configuration View screen, highlight the logical drive that is to be reconfigured. 5. Click the Drive Settings option on the Logical Drive menu. 6. Choose a stripe size. 7. Save the changes and close out of CPQONLIN.