HP 175X HP Jetdirect 200m Print Server - (English) Administrator Guide - Page 153
Wireless, Network Statistics, Table 4.13, Other Protocols 2 of 2
UPC - 882780301092
View all HP 175X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Table 4.13 Other Protocols (2 of 2) Item Enable Device Discovery Enable Management Protocols Description Enable or disable device discovery protocols supported by the print server: SLP (Service Location Protocol). If enabled (checked), the HP Jetdirect print server sends SLP packets, which are used by system applications for automated discovery and installation. If disabled (cleared), SLP packets are not sent. mDNS (multicast Domain Name System). If enabled (checked), Multicast Domain Name System (mDNS) services are provided. mDNS is typically used on small networks for IP address and name resolution (through UDP port 5353) where a conventional DNS server is not used. Multicast IPv4. If enabled (checked), the print server will send and receive IP version 4 multicast packets. Enable or disable Telnet access and the use of FTP to upgrade firmware on the print server. Telnet and FTP are not secure protocols and device passwords may be intercepted. Enable or disable RCFG, a remote IPX configuration protocol used by older management tools to configure Novell NetWare parameters. Disabling RCFG does not affect direct mode printing using IPX/SPX. Disabling Telnet, FTP firmware upgrades, and RCFG is recommended. Wireless Use this link to manage secure wireless configuration settings. For the features and parameter settings on this page, see Table 4.3. Network Statistics This page is used to display counter values and other status information currently stored on the HP Jetdirect print server. This information is often useful to diagnose performance and operational problems associated with the network or network device. ENWW Using the Embedded Web Server 153