HP 2000-130CA Service Guide - Page 71
Power connector cable, Close the computer.
View all HP 2000-130CA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Power connector cable Description Power connector cable Spare part number 641394-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 43), and then remove the following components: ● Optical drive (see Optical drive (select models only) on page 44) ● Keyboard (see Keyboard on page 53) ● Top cover (see Top cover on page 56) ● USB board (see USB board on page 62) Remove the power connector cable: 1. Close the computer. 2. Turn the computer upside down, with the front toward you. 3. Disconnect the power connector cable (1) from the system board. 4. Release the power connector cable from the clips (2) built into the base enclosure. Component replacement procedures 63