HP 2000-350US HP 2000 Notebook PC - Maintenance and Service Guide - Page 60
Remove the top cover, TouchPad button board and cable see
View all HP 2000-350US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Description Top cover (includes TouchPad and TouchPad cable) Spare part number 646137-001 Before removing the top cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 39). 5. Remove the optical drive (see Optical drive (select models only) on page 40). 6. Remove the keyboard (see Keyboard on page 49). When replacing the top cover, be sure that the following components are removed from the defective top cover and installed on the replacement top cover: ● Power button board and cable (see Power button board on page 55) ● TouchPad button board and cable (see TouchPad button board on page 56) Remove the top cover: 1. Close the computer. 2. Turn the computer upside down, with the front toward you. 3. Remove the eight Phillips PM2.5×6.0 screws on the surface of the base enclosure that secure the top cover to the computer. 52 Chapter 4 Removal and replacement procedures