HP 2133 Computer Setup - Windows Vista and Windows XP - Page 12
System Configuration menu - hard drive
UPC - 884420156444
View all HP 2133 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
System Configuration menu NOTE: Some of the listed System Configuration options may not be supported by your computer. Select Boot Options Device Configurations Built-In Device Options To do this ● Set an f9 and f10 delay when starting up. ● Set the Express Boot Popup delay in seconds. ● Enable/disable internal network adapter boot and set the boot mode (PXE). ● Enable/disable MultiBoot, which sets a boot order that can include most boot devices in the system. ● Set the boot order. ◦ 1st Boot device: USB devices ◦ 2nd Boot device: Notebook hard drive ◦ 3rd Boot device: Notebook Ethernet ● Swap the functions of the fn key and left ctrl key. ● Enable/disable USB legacy support. When enabled, USB legacy support allows the following: ◦ Use of a USB keyboard in Computer Setup even when a Windows operating system is not running. ◦ Startup from bootable USB devices, including a hard drive, diskette drive, or optical drive connected by a USB port to the computer. ● Enable/disable fan always on while connected to an AC outlet. ● Enable/disable SATA Native Mode. ● Enable/disable embedded WLAN Device Radio. ● Enable/disable Bluetooth. ● Enable/disable integrated camera. ● Enable/disable Wake on LAN. ● Enable/disable the ExpressCard slot. 6 Chapter 3 Computer Setup menus