HP 22-b400 Optical Drive Replacement Instructions - Page 1
HP 22-b400 Manual
View all HP 22-b400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Optical Drive Replacement Instructions 852271-001 Before you begin Observe the following requirements before removing and replacing the optical drive. WARNING: Never open the cover while the power cord is attached. You might damage your computer or be injured by the spinning fan blades. WARNING: Avoid touching sharp edges inside the computer. CAUTION: Static electricity can damage the electronic components inside the computer. Discharge static electricity by touching the metal cage of the computer before touching any internal parts or electronic components. Tools needed Phillips #2 screwdriver Small screws are easily lost. Remove screws over a surface that enables you to retrieve them if they fall. NOTE: Computer appearance and features may vary by model. Removing the optical drive 1. Disconnect the power cord and all attached cables from the back of the computer. 2. Using caution, lay the computer down on a flat surface covered with a soft cloth. 852271-001 1