HP 22.1kVA PDU MANAGEMENT MODULE INSTALLATION INSTRUCTIONS

HP 22.1kVA Manual

Get HP 22.1kVA PDF manuals and user guides View all HP 22.1kVA manuals
Add to My Manuals
Save this manual to your list of manuals

HP 22.1kVA manual content summary:

  • HP 22.1kVA | PDU MANAGEMENT MODULE INSTALLATION INSTRUCTIONS - Page 1
    Instructions © Copyright 2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services PDU Management Module User Guide located on the HP . For a detailed list of supported PDUs, refer to the HP
  • HP 22.1kVA | PDU MANAGEMENT MODULE INSTALLATION INSTRUCTIONS - Page 2
    PDU might look different than shown. Checking the LED indicator If the LED indicator illuminates or flashes, refer to the "Troubleshooting" section in the user guide for more information. Connecting the serial cable Connect a serial cable between the serial connector on the management module and
  • HP 22.1kVA | PDU MANAGEMENT MODULE INSTALLATION INSTRUCTIONS - Page 3
    Launching a terminal emulation program NOTE: HyperTerminal is the remote communication program provided with Microsoft® Windows® and is used in this section as an example for setting up a terminal emulation session. If you are using another utility, the steps might be different. 1. On the host
  • HP 22.1kVA | PDU MANAGEMENT MODULE INSTALLATION INSTRUCTIONS - Page 4
    Configuring the management module network parameters Use the HP PDU Management Module Configuration Utility to configure the minimum settings required to access the management module remotely using telnet or the web interface. You can configure other settings using this utility in conjunction with a
  • 1
  • 2
  • 3
  • 4
HP PDU Management
Module
Installation Instructions
© Copyright 2005 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Microsoft and Windows are U.S. registered trademarks of Microsoft
Corporation.
November 2005 (First Edition)
Part Number 404318-021
Overview
The HP PDU Management Module enables you to monitor
and manage power environments
of up to two single input
PDUs per management module.
For more information about any of
the topics covered in this
document, refer to the
HP PDU Management Module User
Guide
located on the HP website
).
Kit contents
•
This document
•
Warranty information
•
Management module and mounting hardware
•
Serial cable
To download the latest version of management module
firmware, visit the HP website
).
Required tools
•
Phillips screwdriver
•
Flat-head screwdriver
Installing the management
module
Install the management module on a single or dual PDU. For a
detailed list of supported PDUs, refer to the HP website
).
NOTE:
It is not necessary to power down the PDU
before installing the management module.
1.
Connect the serial connector on the rear panel of the
management module to the serial connector marked Port
2 on the PDU.
2.
Secure the serial connection using the screws provided.