HP 22.1kVA HP 30-A Power Distribution Unit Installation Instructions - Page 1

HP 30-A Power Distribution Unit Installation Instructions About this device The HP 30-A Power Distribution Unit (PDU) provides flexibility for your power requirements. Kit contents The following items are required for installation: • 30-A PDU (1) • M5 x 10-mm screws (4) • Hex nuts with captive M5 star washers (2) • M5 barrel nuts (2) • M5 cage nuts (4) • Tie wraps (10) This kit might contain extra hardware for your convenience. Required tools The following tools are required for installation: • T-25 Torx driver • Cage nut insertion tool (included with your original rack hardware kit) Important safety information Before installation, read the Important Safety Information on the HP website (http://www.hp.com/support/importantsafetyinformation). © Copyright 2006 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. March 2006 (First Edition) Part Number 418554-001