HP 2200dn HP LaserJet 2200 series printer - Getting Started Guide - Page 10
Step 3: Install Toner Cartridge, Hewlett-Packard Company cannot - printer refill
View all HP 2200dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Step 3: Install Toner Cartridge 1 Open the printer's top cover. 1 2 Remove the toner cartridge from its packaging. Rotate the cartridge and gently shake it from side to side to distribute the toner evenly inside the cartridge. CAUTION 2 To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. 3 Locate the sealing tape tab on the end of the cartridge. Carefully bend the tab back and forth until it separates from the cartridge. Firmly pull the tab straight out from the 3 cartridge to remove the entire length of tape. Avoid touching any black toner on the tape. Note If toner gets on your clothing or hands, wipe it off with a dry cloth and wash clothing in cold water. (Hot water sets 4 toner into fabric.) 4 Position the cartridge as shown with the arrow pointing into the printer. Slide the cartridge into the printer as far as it will go and close the top cover. Note Hewlett-Packard Company cannot recommend use of non-HP toner cartridges, either new, refilled, or remanufactured. Because they are not HP products, HP cannot influence their design or control their quality. 6 ENWW