HP 24-e000 Liquid-Filled Heat Sink Replacement Instructions - Page 3

Replacing the liquid-filled heat sink

Get HP 24-e000 PDF manuals and user guides View all HP 24-e000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

Replacing the liquid-filled heat sink 1. Insert the assembly into the computer with the heat sink on top of the processor and the fan against the computer back wall (1). Tighten the four screws on the heat sink (2), and then connect the fan cable to the system board (3). On the outside, rear of the computer, replace the four screws to secure the fan (4). 2. Position the access panel back into place on the side of the computer (1), and then slide the release latch to the locked position (2). 3. Plug the power cord and any additional cables into the 4. Press the power button to turn on the computer. back of the computer. © Copyright 2017 HP Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: April 2017 PRINTER: Replace this bo x with Pr inted- In (PI) Statement(s) as p er sp ec. 936168-001 NOTE: This box is simply a placeholder. PI Statement(s) do n ot ha ve to fit insid e the b ox 3 but sh ould be placed in this area .

  • 1
  • 2
  • 3
3
Replacing the liquid-filled heat sink
1.
Insert the assembly into the computer with the heat sink
on top of the processor and the fan against the
computer back wall
(1)
. Tighten the four screws on the
heat sink
(2)
, and then connect the fan cable to the
system board
(3)
. On the outside, rear of the computer,
replace the four screws to secure the fan
(4)
.
2.
Position the access panel back into place on the side
of the computer
(1)
, and then slide the release latch to
the locked position
(2)
.
3.
Plug the power cord and any additional cables into the
back of the computer.
4.
Press the power button to turn on the computer.
© Copyright 2017 HP Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for
HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty.
HP shall not be liable for technical or editorial errors or omissions contained herein.
First Edition: April 2017
PRINTER: Replace this box with Printed- In (PI)
Statement(s) as per spec.
NOTE: This box is simply a placeholder. PI
Statement(s) do not have to fit inside the box
but sh ould be placed in this area.