HP 2420 HP Embedded Web Server - User Guide - Page 9
System requirements, Opening the HP Embedded Web Server, Login and logoff - default password
UPC - 829160289205
View all HP 2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
System requirements In order to use the HP Embedded Web Server, you must have the following components: ● A supported Web browser. EWS-supported Web browsers include (but are not limited to) the following: • Konqueror 3.0 or later • Microsoft Internet Explorer 6.0 or later • Mozilla 1.0 (and Mozilla derivatives) • Netscape Navigator 6.2 or later • Opera 7.0 or later • Safari 1.0 or later ● A transmission control protocol/Internet protocol- (TCP/IP-) based network connection. ● An HP Jetdirect print server (embedded or enhanced input/output [EIO]) installed in the product. Opening the HP Embedded Web Server Use the following procedure to open the HP Embedded Web Server. Note You cannot view the HP Embedded Web Server screens from outside of a firewall. 1 Open a supported Web browser. 2 In the Address or Go to field, type the Internet protocol (IP) address that is assigned to the product (for example, http://192.168.1.1) or the host name (for example, npi[XXXXXX] or a configured host name such as http://www.[your_server].com). If you do not know the IP address for the product, you can find it on the Configuration page. See the user guide that came with your product to see how to print a Configuration page at the control panel. Login and logoff Note The HP Embedded Web Server (EWS) has screens that can be used to view product information and change configuration options. The screens that appear, and the settings on them, vary according to how you gain access to the EWS: as a general user, an information technology (IT) administrator, or a service provider. These passwords can be customized by an IT administrator or a service provider. In a password-protected HP Embedded Web Server, only the Information tab is available to users who do not log in by using the password. If no password has been set (which is the default), all of the tabs are visible. If a password has been set, you must log on as an IT administrator or a service provider to gain access to the protected HP Embedded Web Server tabs (Settings and Networking). For information about changing passwords as an IT administrator, see "Security" on page 31. If you are a service provider, see your product service guide. To log in as an administrator Use the following procedure to log in to the HP EWS as an administrator. ENWW System requirements 3