HP 2430 HP LaserJet 2400 Series - User Guide - Page 61
Shrinkage might be the result of environmental conditions. For optimum performance, make
UPC - 829160975702
View all HP 2430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
3. Slide the width guides on tray 1 outward to a position that is slightly wider than the envelopes. 4. Place the envelopes into the tray short-edge in, print-side up. The stamp end must enter the printer first. 5. Slide the width guides inward until they lightly touch the envelope stack without bending it. The envelopes should be centered between the paper guides and under the tabs on the paper-width guides. NOTE If the envelope has a flap on the short edge, this edge must enter the printer first. You might experience some jams when using any media that is less than 178 mm (7 inches) long. Shrinkage might be the result of environmental conditions. For optimum performance, make sure that you are storing and handling the paper correctly. For more information see Printing and paper storage environment. Using media from another manufacturer might also help. ENWW Printing on envelopes 49