HP 248 Maintenance and Service Guide - Page 88
Speakers, Remove the Philllips PM2.0×3.0 screw
View all HP 248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Remove the power button board: 1. Turn the top cover upside down with the front toward you. 2. Detach the power button board cable (1) from the top cover. (The power button board cable is attached to the top cover with double-sided adhesive.) 3. Remove the Philllips PM2.0×3.0 screw (2) that secures the power button board to the top cover. 4. Remove the power button board (3) and cable. Reverse this procedure to install the power button board. Speakers Description Speaker Kit (includes left and right speakers and cables) Spare part number 746656-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the Battery (see Battery on page 53), and then remove the following components: a. Service cover (see Service cover on page 54) b. Hard drive (see Hard drive on page 55) 78 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts