HP 2500 HP PCL/PJL reference - PCL 5 Comparison Guide - Page 75
Pixel Placement Command (HP-GL/2), PP [mode], Parameter, Format, Functional Range, Default
View all HP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Pixel Placement Command (HP-GL/2) The Pixel Placement (PP) command controls how pixels are placed on the layout grid during polygon fills. Two pixel placement modes are grid intersection or grid centered. PP [mode] ; Pixel Placement Command (HP-GL/2) Parameter mode Format clamped integer Functional Range 0 or 1 Default 0 (grid intersection) Note mode 0 = grid intersection; device draws pixels centered at grid intersections (see Figure 2-1). 1 = grid centered; device draws pixels centered inside the boxes created by the grid (see Figure 2-1). The command is the HP-GL/2 version of the PCL Pixel Placement command. Whatever mode is selected, using the HP-GL/2 PP command also applies to PCL operation. Likewise the PCL Pixel Placement command also affects HP-GL/2 pixel placement. Microsoft Windows fills polygons based on grid centered method. This command determines how pixels will be placed for both HP-GL/2 and PCL operation. The PP command is not defaulted by an IN command. ENWW Printer-Specific Differences 2-27