HP 2730p Memory Modules - Windows XP - Page 8
CAUTION, Grasp the edge of the memory module - touch
UPC - 884420401063
View all HP 2730p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. 7. Loosen the 6 memory module compartment screws (1). 8. Lift the memory module compartment cover (2) away from the computer. 9. If you are replacing a memory module, remove the existing memory module: a. Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. b. Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an electrostatic-safe container. 2 Chapter 1 Adding or replacing a memory module